Menu
The “Driver Version” must say “2. Tell us about your experience with our site. Prolific also prohibits the distribution of any PL drivers including download links without written permission from Prolific. Or you may get no error at all, but your device will still not work. Below installer program will remove all of the incompatible drivers — make a change so that Windows can never update the driver without your approval — and install the Version 3. The latest version doesn’t work anymore with old hardware, and you need to downgrade the driver.
Jun 24, 2018 PROLIFIC USB TO SERIAL WINDOWS 7 X64 DRIVERS DOWNLOAD - The 'Driver Version' must say '2. Tell us about your experience with our site. Prolific also prohibits the distribution of any PL drivers. Please be warned that counterfeit (fake) PL-2303HX (Chip Rev A) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, were being sold in the China market. Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality and causes Windows driver compatibility issues. I am trying to get a USB to Serial cable installed on Windows 7 (64-bit). Radio Shack Model: 26-949. The cable works fine in XP. I have tried Radio Shack, FTDI, Prolific drivers, but to no avail. A quick note on installing the Prolific PL-2303 USB-to-Serial driver under Windows 7. My Puxing PX-777 Plus radios can be programmed using a USB Programming Cable. The “6-in-1” programming software is only available for Windows. On my Mac, I run a virtual Windows 7 installation under VMware Fusion. PL-2303 USB-to-Serial driver.
Prolific recommends following vendor cable brands: In the Properties Window, Click on “Driver”. Counterfeit IC products show exactly the same outside chip markings but generally are prolific usb to serial windows 7 x64 poor quality and causes Windows driver compatibility issues Yellow Mark Error Code 10 in Device Manager. Close the Sirf Demo software. Taipei Headquarter 7F, No. Sometimes, installing the latest version of drivers solve the problem, but in this case, this is the opposite.
There is also an installation diagram ( FT232R USB UART Driver) which shows how to install and remove USB drivers on your computer.Note that we have updated the Prolific driver for the Prolific USB to serial driver which you now download below for Windows XP/7/8/10 listed below. The reason for this is that Windows tries to download and install it's own driver.and that driver is known NOT to work. The driver that's running would need to be the Prolific 3.3.2.102 one. A) First, start the windows device manager.
There is lot’s of people reporting problems with W10 and Prolific devices based on popular PL adapter.
The “Driver Version” must say “2. Here is the driver with the solution!! Fo this decision also renders all earlier adapters inoperative. This article was not helpful. After selecting the desire port number, click “OK.
Drivers for USB to Serial Adapter Prolific and FTDI
If you watch the configuration panel, you will see the COM port coming OK, but then switch off because of error FelixHitz replied on December 10, Download drivers from Prolific site. If you want to delete it – use the Windows “Uninstall a Program” or “Add or Remove Program” feature – however this will also uninstall the prlific itself.
Installer program will not run on early Windows 7 or Beta versions. One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs and even some new ones proligic support a limited number of COM ports e.
PL USB to UART Bridge Drivers (Windows)
FelixHitz replied on December 1, It’s a tool named wushowhide. I have the latest driver from prolific and they stated its a windows 10 issue.
Launch the software to use with the new COM port.
If for some reason the above driver does not work, try one of the following: Then run the installer again to install the correct driver.
Or you may get no error at all, but your device will still not work. Hope this information helps and let us know the status of the issue c64 will be glad to help you.
PL2303 USB to UART Bridge Drivers (Windows)
This tool is for profs. Prolific advices end-users to only purchase vendor branded cable products with company name contact information for service and support.
In summary, this article is for: And if you double-click on it, you will see: Removal of this tool: Prolific will take proper and severe actions to cease and confiscate these counterfeit products. Later version, like 3.
Next time, the driver remain to 3. Sorry this didn’t help. Home Contact Support Knowledgebase Downloads. This confirms you need to install correct driver file.
Last Drivers
There are a number of Prolific Serial drivers and these have been listed below. There is also an explanation here (USB to RS232 Driver) which also uses a Prolific USB driver. If the Prolific USB to serial drivers below do not work then see the USB to RS232 driver for more information as it uses more than one option.
There is also an installation diagram ( FT232R USB UART Driver) which shows how to install and remove USB drivers on your computer. Note that we have updated the Prolific driver for the Prolific USB to serial driver which you now download below for Windows XP/7/8/10 listed below.
Install the Prolific USB to Serial driver on Windows
Check the Prolific USB to Serial driver on Windows
Check the driver check for the “Prolific USB-to-Serial Comm Port” device in Device Manager;
Check the “Prolific USB-to-Serial Comm Port” driver version by right-clicking on the Prolific Port and then click on “driver” on the top to check the driver version that you have on your computer. The Prolific USB to Serial Driver date will show below as is shown on the picture below.
Error 10 on the Prolific USB to Serial driver
If you get an error that the Prolific USB to Serial Adapter is not working then you will need to uninstall the driver on your computer and remove the Prolific USB to Serial adpater from your computer. Report and connect the Prolific adapter again and then wait until it looks for the Prolific USB to Serial driver. Direct the software to where you extracted the driver to and install the Prolific driver from there.
Prolific Usb To Rs232 Driver Windows 7 DownloadAdvanced Settings on the Prolific USB to Serial driver
You can change the port settings on the Prolific USB to Serial Adapter settings as shown below. You will need to click on the port options on the top of the menu and then click on the advanced options which holds the advanced port options on the Prolific adapter as shown below.
Note what each of these advanced port settings does as shown below:
This is the Idle Timer for the PL2303 chip to enter suspend mode and the default for this is 10 seconds. You can change this on the Prolific USB to serial adapter. Check your chip as this does not work on the PL2303SA chip. Also note that for the PL2303HXD/EA/RA, you need to write to OTPROM first.
![]()
By default this is enabled. This will disable the DTR/RTS pin initialisation signal during driver load to disable the serial mouse or modem from being detected. Check this setting if your Prolific USB driver is not detecting your serial modem or serial mouse. The Prolific USB to Serial Adapter normally has this enabled as stated before, however for troubleshooting it is always best to check the advanced settings.
The signal needs to be enabled as the default for this setting is TTL=HIGH as well as RS232=LOW.
This is very important if you have many devices. The default for this settings is enabled. If you check this it will ignore PL2303 device Serial Numbers. If you disabled this then each PL2303 device even with different USB serial numbers will be treated as same device. This is more for troubleshooting your serial devices.
This will set the buffer size of the serial device. The default settings for this is 4096.
Prolific USB to Serial Driver Download
(For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions)
Installer version & Build date: 1.10.0 (2014-09-25) Prolific USB to Serial Driver
Installer version & Build date: 1.20.0 (2018-7-30)
VN:F [1.9.22_1171]
Prolific Usb To Serial Driver Windows 7 Blue ScreenProlific USB to Serial Driver, 7.0 out of 10 based on 6 ratingsIncoming Search Terms:Prolific Usb To Serial Driver Windows 7 32-bitRelated Posts
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |